Main Page

For poured concrete walls or concrete slab floor

 

wet basement

 

AQUA STOP

 

AQUA-STOP is a commercial grade, cementitious, crystalline product that penetrates deep into the concrete to form a barrier that prevents exterior water from penetrating through to the inside face of the wall or floor. Highly effective for repairing wet basement walls and floors, AQUA-STOP can turn a damp basement into a dry and comfortable living space. This one-coat, easy to mix and apply product stops concrete acting like a sponge and drawing moisture from the exterior through to the interior of your house.

 

Benefits of AQUA-STOP basement waterproofing

 

One coat application required each pail covers up to 300 square feet

Can be applied to damp or wet surfaces with a brush or sprayer

Permanent solution will last the lifetime of the structure and does not have to be reapplied

Can be applied on interior and exterior surfaces that are free of paint or other coatings

Certified to ANSI/NSF Standard 61 for Potable Water

Uses European technology Commercial grade product originally developed for waterproofing tunnels and structures underground

Highly resistant to hydrostatic pressure up to 200 psi / 460 feet deep

 

AQUA-STOP can be used to waterproof

Existing concrete basement walls, free of previous coatings

Existing concrete slab floors, free of previous coatings

Commercial structures such as parking garages, reservoirs, etc.

Newly constructed homes to seal the basement for added peace of mind

Drinking water tanks and cisterns

Concrete fish ponds and fountains

Swimming pools

Retaining walls and exterior concrete surfaces to seal and protect from water penetration and freeze/thaw damage

 

 


                                                                  

For brick, block or stone foundations

 

wet basementAqua Block

 

For foundations constructed of cement blocks, bricks or stone and mortar, the product you need is AQUA-BLOCK . This is a state-of-the-art, professional grade cementitious coating that waterproofs old or new, structurally sound basement walls. Easy to mix and apply, AQUA-BLOCK leaves a white coating on the wall which can be painted if desired. The product forms a very strong bond with the existing surface that is highly resistant to negative and positive hydrostatic pressure to a depth of 260 feet which is equal to 100 psi. AQUA-BLOCK  can be used to waterproof basements, wine cellars, fish ponds, crawl spaces,etc.
 

Benefits of AQUA-BLOCK :

 

Easy to mix and apply with brush contained in each pail

Most effective alternative to expensive construction repairs

One pail will cover 100 square feet (allows for two coats recommended application)

Non toxic with no harmful ingredients or fumes

Seals cracks up to 1/32" for larger cracks repair first with AQUA-STOP CRACK FILLER

Tested up to 100 psi (260 feet)

Can be applied to a damp or wet surfaces that are free of paint and other coatings

Environmentally friendly and safe for the applicator

 

 

Contact Us    |    FAQ    |    Foundation Waterproofing    |    Basement Waterproofing